Courtney's Design Tips

Do I need an electrician and a permit in Plano to add an outlet behind my TV, and what does it cost?

In Plano, paid permit-level electrical work goes to TDLR-licensed electricians at a city-registered contractor. Angi's Dallas price: $135 to $310 an outlet.

Tall white panel column between grey walls with white diagonal trim, with a TV wall mount and a wall plate below it and a linear electric fireplace near the floor, before the TV is hung

To add an outlet behind your TV in Plano, you have two routes under the city's Electrical Code, Ordinance 2025-6-13. You hire TDLR-licensed electricians working for an electrical contractor registered with the City of Plano (Sec. 6-327, 6-328), or you do the work yourself on the home you own and live in, with your own Plano permit (Sec. 6-281(b)). Plano's permit handout lists "Electrical work" as needing a permit, so confirm your outlet with Plano Building Inspections. Angi's Dallas page puts a single outlet at $135 to $310. On a custom accent wall from Lively Luxury Designs, a new outlet means an electrician in the room.

Can I add the outlet behind my TV myself in Plano?

You can add the outlet behind your TV yourself in Plano only under the city's homeowner rule. Plano Ordinance 2025-6-13, Sec. 6-281(b), lets a homeowner "personally install electrical conductors or equipment within his place of residence" if the owner applies for and receives a permit, pays the fees, does the work to code and applies for an inspection. The work must be done by you, on a homestead you own and live in, without pay. The same section says the homeowner "shall not employ another person to assist him in any way."

Texas law sends you back to the city. Texas Occupations Code section 1305.003(a)(6) exempts electrical work "not specifically regulated by a municipal ordinance" that a person does on a home they own and live in. Section 1305.201(d) says electrical work inside a city's limits "must be installed in accordance with all applicable local ordinances." The Texas Department of Licensing and Regulation (TDLR) says the same on its exemptions page: "Municipal or regional regulations may override these exemptions." In Plano, Sec. 6-281(b) is that local rule, so your do-it-yourself outlet still runs through a Plano permit and inspection.

Plano's fee schedule (Ordinance 2025-11-4) lists $85 for a residential simple trade permit. Ask Building Inspections which permit applies to your outlet before you file.

Does a new outlet behind a TV need a City of Plano permit?

Plano's permit handout lists "Electrical work" among the projects that need a permit, but it does not name a new outlet, so ask Plano Building Inspections about yours before work starts. The handout, "When Is a Permit Required?" from the City of Plano Building Inspection Department (revised 09/28/2016), says "Repair work such as replacing switches, plugs and ballasts is exempt." It also says permits are not required "when replacing fixtures on existing wiring." Adding an outlet where you had none is not one of the repairs the handout names.

The same handout says "This is not an all-inclusive list" and sends questions about a specific project to the Building Inspection Department. Bring these questions when you call or email:

  • Does a new outlet behind my TV need a permit?
  • Which permit covers one outlet?
  • If I hire out the work, does my electrical contractor apply for the permit?
  • When is the rough inspection, and when can my panels go up?

Which electrician can add the outlet in Plano, and what does the city inspect?

For electrical work that needs a permit in Plano, you hire TDLR-licensed electricians working for an electrical contractor registered with the City of Plano (Ordinance 2025-6-13, Sec. 6-327, 6-328). Plano registers contractors, not individual electricians. Sec. 6-328 sets "two (2) classes of local electrical registration": Electrical Contractor and Electrical Sign Contractor. Under Sec. 6-327(b), "Only persons who are employed by a registered electrical contractor" (or a registered sign contractor) may do the work, under the master electrician's supervision.

The city's "Tips on Contractor Selection" handout says "Contractors must be registered with the city before doing any work" and "Never use a contractor who says no permits or inspections are required." Be wary if a contractor asks you to pull the permit for their work. The handout explains why: "If you obtain the permit for a contractor, then you will be responsible for their work." Before your project begins, it says to insist on seeing the permit.

Once a permit is issued, Plano's Electrical Code sets the inspection steps for your outlet:

  1. When the rough wiring is done, the person responsible notifies the electrical inspector. The inspector inspects within 24 hours of notice, not counting Saturdays, Sundays and legal holidays (Sec. 6-282).
  2. Nothing covers the wiring until it is approved. Sec. 6-284 makes it unlawful to cover any part of a wiring installation "with flooring, lath, wallboard, or other material" before approval.
  3. When the work is complete, the permittee calls for the final inspection (Sec. 6-283).
  4. The new wiring is not connected to power until the inspector issues a certificate of approval (Sec. 6-285).
Your route in PlanoWho does the workWho applies for the permitInspectionsPlano Ordinance 2025-6-13
Hire outTDLR-licensed electricians employed by an electrical contractor registered with the City of PlanoYour contractor (the city's handout warns against pulling it for them)Rough, then finalSec. 6-327, 6-328, 6-282 to 6-285
Do it yourselfYou alone, on the home you own and live in, with no paid helpYouRough, then finalSec. 6-281(b), 6-282 to 6-285

What does it cost to add an outlet behind a TV?

Adding a single outlet costs $135 to $310 in Dallas, by Angi's "Cost to Install an Outlet in Dallas, TX" page, updated June 10, 2026. That is Angi's Dallas figure, not a Plano price and not a Lively Luxury Designs price. Angi's national outlet page, updated October 15, 2026, says to budget for permits, new wiring and drywall repairs, "which can add $150 to $1,000 or more." The drywall part of that only applies if your finished wall has to be cut open and patched.

If you are adding an accent wall anyway, the outlet can be planned into that job before the panels cover the wall. Your outlet has no separate published price from Lively Luxury Designs. Its accent walls start at $1,500 for a 10 by 15 foot wall, by its custom accent walls page. Ask whether the outlet and any permit are inside your quote, and get the answer in writing.

Can I just run the TV's power cord inside the wall?

No. Plan on a real outlet behind your TV, or a listed in-wall kit, instead of pushing the TV's power cord through a hole in the wall. National Electrical Code section 400.12, 2020 edition, says flexible cords "are not permitted to be run through holes in walls," and are not a substitute for fixed wiring, per Mike Holt's Code Q&A in EC&M magazine (February 10, 2022). Plano now uses the 2023 edition of the code (Ordinance 2025-6-13, Sec. 6-272). Mike Holt also writes: "It remains unclear how the uses not permitted can apply to cord sets and power-supply cords."

A listed in-wall power kit keeps your cord outside the wall, but it still needs a normal outlet. For Legrand's cETLus-listed Wiremold CMK70 kit, the maker says "A power cord is provided to connect the lower module into a standard wall mounted outlet," and that cord "must be utilized and not substituted." The kit's "no electrician or hard-wiring required" line is about HDMI and other low-voltage cables. So a kit helps when you already have an outlet low on the same wall, and it does not give you one where you have none.

Is it easier to add the outlet before the panels or LED lights go up?

Yes. The outlet behind your TV is easier to add before your panels or LED lights go up, because Plano does not allow new wiring to be covered until the inspector approves it (Ordinance 2025-6-13, Sec. 6-284). The wiring goes in first, the rough inspection happens next, and only then do the panels close over it. The fireplace remodels page from Lively Luxury Designs says a recessed TV box is "easy at framing and awkward afterwards." Its accent wall page says outlets, switches and vents "are drawn into the layout before anything is cut, so a batten does not land half over a switch plate."

The LED strips on your TV wall are a different kind of wiring from your outlet. Plano's Electrical Code does not apply to low-voltage wiring fed from a source that can never go above 50 volts and can never put out more than 10 amps on a short circuit (Sec. 6-304). Texas also exempts Class 2 power-limited circuits from electrician licensing, by TDLR's exemptions page and Occupations Code section 1305.003(a)(12). That covers LED strips on a listed Class 2 driver. The driver's own 120-volt power, and your TV outlet, are not low voltage. On Lively's light walls, "all lighting components are professionally installed by our licensed electricians," in Lively's published words. One customer's Google review from September 2025 said: "The design, paint, and LED lighting behind the TV turned out perfect."

To plan the outlet into your own Plano TV wall, take these steps in order:

  1. Pick your TV, its height, and where your streaming box or game console will sit.
  2. Mark the outlet, the LED driver and the light switch on the layout drawing before anything is cut.
  3. Ask Plano Building Inspections whether your outlet needs a permit, and who applies for it.
  4. Have the wiring put in and inspected before any panel covers it (Sec. 6-282, 6-284).
  5. Close the wall with panels, then call for the final inspection (Sec. 6-283).

To see how long the panel work itself takes, read how long an accent wall install takes. To see finished TV walls, browse High Ceiling and TV Walls, then book a consultation. The accent wall page says the consultation is at no cost to you.

Quick answers

Do I need a permit to add an outlet behind my TV in Plano?

Plano's permit handout lists "Electrical work" as needing a permit and exempts repairs such as replacing switches and plugs. Adding a new outlet behind your TV is not one of the repairs it names, so ask Plano Building Inspections before work starts. If a permit applies, the wiring is inspected before panels or drywall cover it (Plano Ordinance 2025-6-13, Sec. 6-284).

Do I need an electrician to add an outlet in Plano?

For electrical work that needs a permit, Plano's Electrical Code calls for TDLR-licensed electricians working for an electrical contractor registered with the City of Plano (Ordinance 2025-6-13, Sec. 6-327, 6-328). The other route is a homeowner doing the work alone on the home they own and live in, with their own Plano permit and inspection (Sec. 6-281(b)).

How much does it cost to add an outlet behind a TV?

Angi's Dallas page, updated June 10, 2026, puts a single outlet at $135 to $310. Angi's national page adds that permits, new wiring and drywall repairs "can add $150 to $1,000 or more." Your outlet has no separate published price from Lively Luxury Designs, so ask whether the outlet is inside your accent wall quote.

Can I run a TV power cord inside the wall?

National Electrical Code section 400.12, 2020 edition, says flexible cords are not permitted to be run through holes in walls, per Mike Holt in EC&M magazine (February 10, 2022). Mike Holt notes it is unclear how that section applies to power-supply cords. The practical plan is a real outlet behind your TV, or a listed in-wall kit such as Wiremold's CMK70 plugged into a normal outlet.

Get In Touch

Have a room you want to change?

Tell us which room, roughly when the house was built, and what bothers you about it now. That is enough for us to say what the project looks like.

Still Have Questions? Take Me To Your FAQ's